5
IP2371EN
This installation manual is intended for qualified personnel only •Instal-
lation, electrical connections and adjustments must be performed by
qualified personnel, in accordance with Good Working Methods and in
compliance with the current regulations • Read the instructions careful-
ly before installing the product. Wrong installation could be dangerous •
Before installing the product, make sure it is in perfect condition •
The packaging materials (plastic, polystyrene, etc.) should not
be discarded in the environment or left within reach of chil-
dren, as they are a potential source of danger • Do not install the
product in explosive areas and atmospheres: the presence of in-
flammable gas or fumes represents a serious safety hazard • Make
sure that the temperature range indicated in the technical specifi-
cations is compatible with the installation site • Before installing the
motorization device, make sure that the existing structure, as well
as all the support and guide elements, are up to standards in terms
of strength and stability. Verify the stability and smooth mobility of
the guided part, and make sure that no risks of fall or derailment
subsist. Make all the necessary structural modifications to create
safety clearance and to guard or isolate all the crushing, shearing,
trapping and general hazardous areas • The motorization device
manufacturer is not responsible for failure to observe Good Working
Methods when building the frames to be motorized, or for any defor-
mation during use • The safety devices (photocells, safety edges,
emergency stops, etc.) must be installed taking into account the ap-
plicable laws and directives, Good Working Methods, installation
premises, system operating logic and the forces developed by the
General safety precautions for technical personnel
ATTENTION! Important safety instructions.
Please follow these instructions carefully. Failure to observe
the information given in this manual may lead to
severe personal injury or damage to the equipment.
Keep these instructions for future reference.
This manual and those for any accessories can be
downloaded from www.ditecautomations.com.
To Next Page
Loading...
Need help?
General
