revision: 1
FlexxPump 125 B
User Manual
45
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
1. Unscrew the empty cartridge from the
FlexxPump 125 B.
Turn the empty cartridge counterclockwise
from the FlexxPump 125 B and dispose it
properly after completion of the work.
Pay attention to cleanliness during
the work. Make sure that dirt and foreign
bodies do not get into the lubricant inlet.
If necessary, carry out cleaning work
beforehand (chapter 7.1.2).
2. Remove the empty battery.
Use the battery cable to pull the empty
battery out of the battery compartment.
Disconnect the reverse polarity protected
plug connection and dispose of the empty
battery properly after completion of the
work.
To Next Page
Loading...
