DLS FlexxPump 125 B - Page 46

revision: 1
FlexxPump 125 B
User Manual
46
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
3. Inserting the new battery.
Wait at least 60 seconds before inserting
the new battery!
 Connect the new battery to the battery
cable using the reverse polarity protected
plug.
 Store the battery and the battery cable in
the battery compartment.
 Make sure that the battery cable or
plug does not protrude from the battery
compartment.
4. Mounting the new lubricant cartridge
 Place the full lubricant cartridge on the
FlexxPump 125 B.
 Turn the lubricant cartridge clockwise onto
the FlexxPump 125 B.
 The end position is reached after 2 full
rotations when the label of the lubricant
cartridge is aligned with the front foil of the
FlexxPump 125 B.
LCD