DLX Luxe X - Power on Your Luxe; Adjust Luxe Velocity

7
8
STEP SEVEN POWER ON YOUR LUXE
®
MARKER
TURN THE MARKER ON BY DOUBLE-CLICKING (quickly pressing twice) the power button, or
by holding it down for two seconds. Turn it off by pressing and holding the power button for two
seconds. When the Luxe
®
turns on, the OLED display will be activated, indicating the marker's
status.
ALTHOUGH THE POWER BUTTON SERVES AS THE LUXE
®
’S SAFETY SWITCH TO PREVENT ACCIDENTAL
FIRING, IT SHOULD NEVER BE RELIED UPON IN PLACE OF A BARREL BLOCKER AND PROPER PAINTBALL
EYE PROTECTION.
STEP EIGHT ADJUST LUXE® VELOCITY
FILL THE HOPPER WITH PAINTBALLS and turn it on. While wearing ASTM compliant paintball
goggles, in an area where all bystanders are protected, remove the barrel blocker and fire
over a chronograph to measure the velocity. Using a 5/32-inch allen wrench on the adjuster
in the bottom of the vertical regulator, turn clockwise to increase velocity/pressure, and
counterclockwise to decrease. Take three or four shots after every adjustment to allow the gas
pressure inside your Luxe
®
to stabilize before firing over the chronograph again to check velocity.
Adjust until the marker is firing consistently within the limits for the field where you are playing.
NEVER ADJUST YOUR LUXE
®
TO FIRE AT GREATER THAN 300 FEET PER SECOND.
+
–
03