Need help?Do you have a question about the Domino D Series and is the answer not in the manual?
General| Print Technology | Thermal Transfer |
|---|---|
| Print Speed | Up to 300 mm/s (12 ips) |
| Print Resolution | 300 dpi |
| Ink Types | Thermal transfer ribbon |
| User Interface | Touchscreen |
| Connectivity | Ethernet, USB, Serial |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Supported Materials | Paper |
| Operating System Compatibility | Windows |
General safety guidelines and user responsibilities for operating the laser marking system.
Details on hazards: electrical energy, compressed air, laser radiation, dusts, vapors.
Requirements for achieving Class 1 laser installation safety.
Identifies warning signs and their placement on the system.
Describes system wiring, ports, and cable connections.
Installation and power requirements for the control unit.
Procedures for mounting and aligning the laser head unit.
Steps for the first-time startup and basic configuration.
Method for setting code placement relative to product features.
Configuration for optimizing marking speed during product movement.
Overview of the system's control software and its features.
Explanation of physical controls and status indicators.
Procedures for safely powering the system on and off.
How to initiate and terminate the marking process.
Configuration of system-wide parameters for all messages.
Tools for creating, editing, and managing marking messages.
Practical step-by-step guides for common operations.
Monitoring system status, faults, and logs.
Detailed technical specifications for D-Series models.
Physical dimensions for system installation and mounting.
Technical details of the optional touchscreen interface.
General guidance for troubleshooting system issues.
Table of system messages and their recommended resolutions.
Procedure for safely replacing the laser lens component.
Instructions for replacing internal power fuses.
Maintenance procedures for the fume extraction unit.
Character set for the 1LS-Arabic font.
Character set for the 1LS-Arial NC font.
Character set for the 1LS-Arial font.
Character set for the 2LS-Arial NC font.
Character set for the 3LS-Rom font.
Overview of supported barcode symbologies.
List and details of supported 1D barcode types.
List and details of supported 2D barcode types.
To Next Page