Domino D Series User Manual

INSTALLATION
L025317 Issue 1 March 2011 2-49
Making marks longer than one field size
By using extended fields it is possible to mark an object that exceeds one field
size.
The procedure is the same as described previously on extending the marking
field in Dynamark 3. Move the marking object out of the real field against the
product movement direction and into an extended field.
Screen shows a long message outside the
marking field and in the extended field.

Domino D Series Specifications

General

Print Technology	Thermal Transfer
Print Speed	Up to 300 mm/s (12 ips)
Print Resolution	300 dpi
Ink Types	Thermal transfer ribbon
User Interface	Touchscreen
Connectivity	Ethernet, USB, Serial
Operating Temperature	5°C to 40°C (41°F to 104°F)
Supported Materials	Paper
Operating System Compatibility	Windows