OPERATION
L025317 Issue 1 March 2011 3-49
General property values
Object Name - Defines the name of the text
object, which clearly identifies it for selection in
the Object Selection window.
Parameter Set - Defines the marking
parameters for the object. Each object must have
a parameter set assigned to it.
x-position - Defines the horizontal coordinate of the object in mm.
y-position - Defines the vertical coordinate of the object in mm
Width - Specifies the width of the object in mm (for text objects,
this represents the size of each character).
Height - Specifies the height of the object in mm (for text objects,
this represents the size of each character).
Rotation [º] - Rotates the object in clockwise or anti-clockwise direction,
negative values give anti-clockwise rotation.
y Angle [º] - Tilts the object into perspective. Positive and negative values in
degrees are possible.
Horizontal - Alignment - Centres the object horizontally.
Vertical - Alignment - Centres the object vertically.
Mirror x - Mirrors the object horizontally.
Mirror y - Mirrors the object vertically.
Mark - Prevents/allows marking of the object. Useful for objects that are
only used as a positional aid when creating an object. The Digital Input
option is for special applications only and requires the Conditional and Mask
values.
To Next Page
Loading...