EasyManuals Logo
Home>Domino>Label Maker>D Series

Domino D Series User Manual

Default Icon
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
HEALTH & SAFETY
L025317 Issue 1 March 2011 1-3
GENERAL
The D-Series laser marking systems are designed and built in accordance with
international standards and other technical specifications, which are to be
observed. The equipment conforms to current technology and approved
safety requirements.
Domino D-Series Laser marking systems are produced by Domino Laser
GmbH Germany. For Sales and support contact Domino.
This safety standard, however, can only be achieved if all intended and
required measures have been taken and are constantly observed. It is part of
the operator’s duties to plan these measures and check their continuing
implementation.
The D-Series laser marking systems have been developed and designed for
fully automated marking of packaging materials and products by use of laser
radiation.
The user must ensure that:
The laser system is only made ready for use after it has been installed and
guarded to Class 1 laser safety standards (EN60825), see “CLASS 1
GUARDING” on page 1-9
The equipment is only to be used for its intended purpose, see
“DESIGNATED USE” on page 1-4.
The equipment is only operated in a good, serviceable condition, and
that all safety installations are regularly checked for their serviceability
Personal protective goggles for maintenance and repair personnel are
required and made available
Only suitable and approved tools and equipment are used
This Product Manual is complete and in a legible condition at the
equipment location at all times
The valid rules and laws regarding accident prevention are available and
observed
Only sufficiently qualified and authorised personnel shall operate,
maintain, and repair the laser marking system
These personnel are regularly instructed in all matters concerning
appropriate labour safety and environmental protection, and that they are
familiar with the operating manual, particularly the safety instructions
contained herein
Any safety and warning signs on the laser marking system must not be
removed and must remain in a readable condition.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Domino D Series and is the answer not in the manual?

Domino D Series Specifications

General IconGeneral
BrandDomino
ModelD Series
CategoryLabel Maker
LanguageEnglish