Domino D Series User Manual

OPERATION
3-62 L025317 Issue 1 March 2011
(3) Name the object so that properties can be assigned to it as "Text2" and
then select the "Parameter Set" to use from the option panel below the
object Name dialogue box. The parameter set selected can be modified
by clicking on the modify button. If there are more parameter sets they
will be available for selection from the dropdown list. Select the default
parameter set and click OK to complete the selection.
(4) Set the position of the text by dragging, resizing or use the alignment
tool if required. Position the text in the center of the print window.
(5) Open the alignment tool bar and position the text as required on the
screen.
Alignment tool button
Property value dialogue button

Domino D Series Specifications

General

Brand	Domino
Model	D Series
Category	Label Maker
Language	English