Operation Section
-76-
Radio
Setting the region of radio reception
1. When the power is turned on, press and hold the
buttons more 3 seconds at the same time as
below;
• U.S.A: Hold down and press
more 3 seconds
FM: 87.7 - 107.9 MHz (200 kHz step)
AM: 530 - 1.7 10 kHz (10kHz step)
• South America : Hold down and press
more 3 seconds
FM: 87.5 - 108.0 MHz (100 kHz step)
AM: 530 - 1.7 10 kHz (10kHz step)
• Asia : Hold down and press
more 3 seconds
FM: 87.5 - 108.0 MHz (100 kHz step)
AM: 531 - 1,602 kHz (9 kHz step)
• Europe: Hold down and press
seconds
FM: 87.5 - 108.0 MHz (50 kHz step)
AM: 522 - 1,629 kHz (9 kHz step)
2. Please wait for more 5 seconds with no operation,
the unit will save and apply your's setting.
If the region setting is not selected correctly to
your country or region, the radio reception can
not be received. Retry the setting the region of
radio reception correctly.
The region setting is required only for the first
time
The region setting is return to the default setting
when the power connector or battery is
disconnected.
Tuning in a station
1. Press the AM or FM button to
change the band in order of AM1.
AM2. FM1 or FM2.
You can select the FM 1. FM2. AM
1 or AM2 radio band.
While the Auto 5tore stations are stored, you can
select the AMA or FMA band by additional.
The previously chosen broadcasting station will be
received.
2. Press the SCN button or turn the
◀◀ TUNE ▶▶ dial left/right to
select the station.
Using TUNE: Briefly turn the dial,
plays previous/next frequency.
Using SEEK: Turn and hold the dial, automatically
search for station with superior reception.
Using SCAN: Press the button, starting from the
current station, stations with superior reception are
scanned for 5 seconds and the previous station is
restored.
During the seeking or scanning, if press or turn the
dial left/right again, the selected station will begin
playing.
During the FM reception, the Stereo [ST] indicator is
on.
MENU
5
D-
MENU
5
D-
MENU
MENU
AM
FM
SCN
AST
To Next Page
Loading...
