1. Introduction
3
General Information
General Information
This Operation and Maintenance Manual provides the most
efficient methods for engine maintenance as well as quick,
efficient methods to determine the cause of engine faults to
ensure that any actions taken by professionally certified
maintenance technicians are performed in the most efficient
and safest way possible. In the event that the engine is
serviced by an untrained technician or in facilities which are
not equipped with the specified tools and equipment, the
operator and/or others around the engine may sustain
life-threatening physical injuries and severe faults may occur
in engine performance.
Regular inspections and maintenance are required to maintain
long-term optimal engine conditions and performance.
In the event that a part must be replaced, only genuine parts
as defined by the parts on the list (PARTS BOOK) should be
used. Using non-genuine imitation parts or recycled parts
may cause critical damage and faults in engine performance.
Hyundai Doosan Infracore shall not be held liable for any
damage or faults resulting from the use of such parts.
The maintenance methods stated in this Operation and
Maintenance Manual are the most efficient and safest work
procedures. Some work procedures require special tools.
For questions about genuine parts and special tools, please
contact us.
This Operation and Maintenance Manual includes 'Danger,'
'Warning' and 'Caution' items intended to reduce the risk of
possible injuries during operation of the engine. Failing to
heed this information may lead to severe faults in engine
performance and operation, as well as severely injuring
workers. Hence, make sure to heed the 'Danger,' 'Warning'
and 'Caution' items. Please note that it is not possible for this
Operation and Maintenance Manual to include information
about every possible danger or unanticipated risk which may
occur while handling and servicing the engine.
To Next Page
Loading...
