Dorma CS 80 MAGNEO Installation And Maintenance Manual

14 DORMA
1.
1.
3.
2.
Carefully open the cover of the control unit
housing by levering it out with the tip of a flat
head screwdriver
Loosenthescrewsoftheconnectionterminals
and remove the internal Schuko-type
shockproof socket.
Then close the cover of the control unit housing.
Move the end stop to the end of the channel and
screw it down.
The end stop must overlap.
Installation and Maintenance Manual
CS 80 MAGNEO
—

Dorma CS 80 MAGNEO Specifications

General

Brand	Dorma
Model	CS 80 MAGNEO
Category	Door Opening System
Language	English