Attaching a VESA mount
Spectrum is compatible with most VESA mounting arms and mounts (sold separately). The VESA
mount must support the 100×100mm VESA Mounting Standard and should be rated to hold at least
5.0kg of weight.
1. Remove the four mounting screws from the back of the monitor.
2. Align the screw holes on your mounting device with the four VESA screw holes in the back of the
monitor, then insert and tighten the four mounting screws through the mounting device and into
the monitor.
IMPORTANT
You might need additional tools such as a screwdriver (purchased separately) when you
attach a mounting device.
To Next Page
Loading...
