Using the on-screen display
Using the on-screen display
Use the on-screen display (OSD) menu to display information about your monitor, or to adjust the
picture properties and monitor features based on your preferences.
Controlling the OSD menu
While the monitor is turned on, you can access the menu and make adjustments using the joystick
on the rear of the monitor by reaching underneath the bottom bezel.
1. To access the OSD menu, depress the joystick to open the OSD.
2. Use the joystick to navigate, select, and adjust the menu choices.
• Pressing up or down will change the current selection or adjust the current setting.
• Pressing right will confirm the currently highlighted choice and proceed to the next
submenu.
• Pressing left will return to the previous menu level.
NOTE
Most settings will automatically be applied and stored as you cycle through the available
options. Some settings do require you to confirm your selection by pressing right once more,
before returning to the previous menu level or closing the OSD menu. These are generally
settings that could cause compatibility issues or jarring changes in the display.
To Next Page
Loading...
Need help?
General
