Using the on-screen display
Audio source
Selects from which of the two active input sources the audio is played in split-screen mode. This
setting is only available when ‘Split-screen mode’ is set to ‘On’.
USB Type-C port mode
Selects between maximum video signal bandwidth, or maximum USB hub data bandwidth for the
USB Type-C port.
maximum USB hub bandwidth
maximum refresh rate at 4K
HDMI port 1 mode
Selects between the maximum performance of HDMI 2.1, or maximum compatibility with previous
HDMI versions for HDMI port 1.
HDMI port 2 mode
Selects between the maximum performance of HDMI 2.1, or maximum compatibility with previous
HDMI versions for HDMI port 2.
DisplayPort mode
Selects between the maximum performance of DisplayPort 1.4, or maximum compatibility with
previous DisplayPort versions for the DisplayPort and USB Type-C ports.
NOTE
The exact bandwidth usage is determined by a combination of resolution, refresh rate,
color depth, and compression. Changing any one of these factors may alter the limits
imposed on the others.
To reach 144Hz refresh rate when USB-C bandwidth priority is set to High USB data speed,
your video source device must support display stream compression (DSC).
On model ES07D03, to reach 144Hz refresh rate when USB-C bandwidth priority is set to
High USB data speed, Spectrum must be updated to firmware version 107 or newer.