IMPORTANT
The host computer must be able to support the USB Power Delivery protocol over the USB
Type-C connector to be charged or powered by Spectrum.
The host computer must be able to support DisplayPort Alternate Mode over the USB Type-
C connector to provide Spectrum with an image signal.
NOTE
When connected by a single USB Type-C cable, Spectrum may not be able to
simultaneously operate the built-in USB hub at its full speed and run the display at its
maximum resolution, refresh rate, and color depth due to technical limitations. The
bandwidth priority can be set in the OSD. You can learn more about setting your priority
preferences on page 38.
Spectrum’s built-in USB hub supports speeds up to 10Gbps. The actual speeds may vary
based on the connected peripherals and the capabilities of the USB port on the host
device.