2
System Overview
2.1
SiteSentinel® iSite™ Console
The SiteSentinel® iSite™ console (Figure 1-1 SiteSentinel® iSite™
Console) monitors up to 256 probes, 64 AST (Flex) probes, 1,024
sensors or combination of each. The console is equipped for up to 16
external output devices to be utilized at once. Since only AC power
connections and Petro-Net communication connections are required, the
console can be installed in many locations within a fueling facility.
The SiteSentinel® iSite™ console can be operated via the integrated
15˝
(38.1 cm)
touch screen display, a local PC connection, or a remote
PC connection. To operate the SiteSentinel® iSite™ console via PC, an
Internet browser capable of rendering Flash 7.0 or higher is required. No
additional hardware or proprietary software is required for remote
connections.
Operation of the console via a local PC connection requires use of the
supplied crossover Ethernet connection cable. To connect remotely via
a local or corporate LAN/WAN, the system’s IP address may be entered
into your Internet browser’s address bar. For remote connections via
other methods, including VNC Viewer software, consult an IT
professional for assistance.
The SiteSentinel® iSite™ supports up to 10 simultaneous browser
sessions in addition to one session via the integrated LCD touch screen.
2.1.1 Blank Door Unit
For sites choosing to operate the console via remote connections only, a
Blank Door option exists. When enabled, the console’s touch screen
display will not be activated; instead, an illuminated push button will be
available on the front panel for alarm notification and acknowledgement.
To Next Page
Loading...
