Vigor2620 Series User’s Guide
95
use.
Always On – If selected, the router will maintain the
PPPoE/PPPoA connection.
Idle Timeout – Maximum length of time, in seconds, of idling
allowed (no traffic) before the connection is dropped.
IP Address From ISP - Specifies how the WAN IP address of
the channel configured.
Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the ISP’s
PPPoE/PPPoA server.
MPoA Obtain an IP address automatically – Select this option if the
router is to receive IP configuration information from a DHCP
server.
Router Name – Sets the value of DHCP Option 12, which
is used by some ISPs.
Domain Name – Sets the value of DHCP Option 15,
which is used by some ISPs.
Specify an IP address – Select this option to manually enter
the IP address.
IP Address – Type in the IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
After finished the above settings, click OK to save the settings and return to previous page.
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
To Next Page
Loading...
Need help?
General
