Vigor2620 Series User’s Guide
329
V
V
I
I
-
-
3
3
-
-
3
3
W
W
L
L
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
WLAN profile is used to apply to a selected access point. It is very convenient for the
administrator to configure the setting for access point without opening the web user interface
of the access point.
Click the number link of the selected profile to modify the content of the profile. Available
settings are explained as follows:
Item Description
Profile There are five WLAN profiles offered to be configured. Simply
click the index number link to open the modification page.
Name Display the name of the profile.
The default profile cannot be renamed.
Main SSID Display the SSID configured by such wireless profile.
Security Display the security mode selected by such wireless profile.
Multi-SSID Enable means multiple SSIDs (more than one) are active.
Disable means only SSID1 is active.
WLAN ACL Display the name of the access control list.
Rate Ctrl Display the upload and/or download transmission rate.
Clone It can copy settings from an existing WLAN profile to another
WLAN profile.
First, you have to check the box of the existing profile as the
original profile. Second, click Clone. The following dialog will
appear.
Third, choose the profile index to accept the settings from the
original profile. Forth, type a new name in the field of
Renamed as. Last, click Apply to save the settings on this
dialog.
The new profile has been created with the settings coming
from the original profile.
To AP Click it to apply the selected wireless profile to the specified
Access Point.
To Next Page
Loading...
Need help?
General
