EasyManuals Logo

Draytek Vigor2620 LTE Series User Manual

Draytek Vigor2620 LTE Series
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Vigor2620 Series User’s Guide
113
Prefix Length – Enter the fixed value for prefix length.
Add – Click it to add a new entry.
Delete – Click it to remove an existed entry.
Unique Local Address
(ULA) configuration
Unique Local Addresses (ULAs) are private IPv6 addresses
assigned to LAN clients.
Off - ULA is disabled.
Manually ULA Prefix - LAN clients will be assigned ULAs
generated based on the prefix manually entered.
Auto ULA Prefix - LAN clients will be assigned ULAs using an
automatically-determined prefix.
Current IPv6 Address
Table
Display current used IPv6 addresses.
DNS Server IPv6 Address Deploy when WAN is up – The RA (router advertisement)
packets will be sent to LAN PC with DNS server information
only when network connection by any one of WAN interfaces
is up.
Enable – The RA (router advertisement) packets will be sent
to LAN PC with DNS server information no matter WAN
connection is up or not.
Primary DNS Sever – Enter the IPv6 address for Primary
DNS server.
Secondary DNS Server –Type another IPv6 address for
DNS server if required.
Disable – DNS server will not be used.
Management Configures the Managed Address Configuration flag (M-bit) in
Route Advertisements.
Off - No configuration information is sent using Route
Advertisements.
SLAAC(stateless) - M-bit is unset.
DHCPv6(stateful) - M-bit is set, which indicates to LAN
clients that they should acquire all IPv6 configuration
information from a DHCPv6 server. The DHCPv6 server
can either be the one built into the Vigor2860, or a
separate DHCPv6 server.
Other Option(O-bit) When selected, the Other Configuration flag is set, which
indicates to LAN clients that IPv6 configuration information
besides LAN IPv6 addresses is available from a DHCPv6
server.
Setting the M-bit (see Management above) has the same
effect as implicitly setting the O-bit, as DHCPv6 supplies all
IPv6 configuration information, including what is indicated as
available when the O-bit is set.
DHCPv6 Server Enable Server –Click it to enable DHCPv6 server. DHCPv6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor2620 LTE Series and is the answer not in the manual?

Draytek Vigor2620 LTE Series Specifications

General IconGeneral
BrandDraytek
ModelVigor2620 LTE Series
CategoryNetwork Router
LanguageEnglish

Related product manuals