Draytek Vigor2620 LTE Series User Manual

Vigor2620 Series User’s Guide
130
Available settings are explained as follows:
Item Description
Choose Private IP or None first.
Private IP Enter the private IP address of the DMZ host, or click Choose
IP to select one.
Choose IP Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of private
IP addresses of all hosts in your LAN network. Select one
private IP address in the list to be the DMZ host.
When you have selected one private IP from the above dialog,
the IP address will be shown on the following screen. Click OK
to save the setting.
If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in WAN
interface, you will find them in Aux. WAN IP for your selection.
Available settings are explained as follows:
Item Description
Enable Check to enable the DMZ Host function.
Private IP Enter the private IP address of the DMZ host, or click Choose
IP to select one.

Draytek Vigor2620 LTE Series Specifications

General

Brand	Draytek
Model	Vigor2620 LTE Series
Category	Network Router
Language	English