Vigor2620 Series User’s Guide
28
Primary DNS Enter the primary IP address for the router.
Secondary DNS Enter secondary IP address for necessity in the future.
VLAN Tag insertion
(VDSL2)/(ADSL)
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please Enter the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Enter the value as the VLAN ID number. The
range is from 0 to 4095.
Priority – Enter the packet priority number for such VLAN.
The range is from 0 to 7.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
2. Please Enter the IP address/mask/gateway information originally provided by your ISP.
Then click Next for viewing summary of such connection.
3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.
4. Now, you can enjoy surfing on the Internet.
To Next Page
Loading...
Need help?
General
