Vigor2620 Series User’s Guide
33
IP address automatically from DHCP server.
Specify an IP address – you have to type relational settings
manually.
IP Address - Enter the IP address.
Subnet Mask –Enter the subnet mask.
Gateway – Enter the IP address of the gateway.
Primary DNS - Enter the primary IP address for the router.
Secondary DNS - Enter the secondary IP address for
necessity in the future.
PPTP Server Enter the IP address of the server.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
3. Please Enter the IP address/mask/gateway information originally provided by your ISP.
Then click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
To Next Page
Loading...
Need help?
General
