Vigor2620 Series User’s Guide
36
D
D
H
H
C
C
P
P
1. Click DHCP as the Internet Access type and click the Next button.
2. The following page will be open for you to Enter the IP address information originally
provided by your ISP.
Available settings are explained as follows:
Item Description
Host Name Enter the name of the host.
Note: The maximum length of the host name you can set is
39 characters.
MAC Some Cable service providers specify a specific MAC address
for access authentication. In such cases you need to enter
the MAC address.
Back Click it to return to previous setting page.
Next Click it to get into the next setting page.
Cancel Click it to give up the quick start wizard.
To Next Page
Loading...
Need help?
General
