Vigor2620 Series User’s Guide
57
Available settings are explained as follows:
Item Description
Enable Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Display Name Enter the description for such WAN interface.
Physical Mode Display the physical mode of this WAN interface.
DSL Mode Specify the physical mode (Auto, VDSL2 or ADSL) for such
router manually.
DSL Modem Code Choose the correct DSL modem code for ensuring the
network connection.
If you have no idea about the selection, simply choose
Default or contact the dealer for assistance.
VLAN Tag insertion Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please Enter the tag value and specify the priority for the
packets sending by WAN interface.
Disable – Disable the function of VLAN with tag.
Tag value – Enter the value as the VLAN ID number. The
range is from 0 to 4095.
Priority – Enter the packet priority number for such VLAN.
The range is from 0 to 7.
After finished the above settings, click OK to save the settings.
To Next Page
Loading...
Need help?
General
