Vigor2920 Series User’s Guide
10
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you see
the ACT LED begins to blink rapidly than usual, release the button. Then the
router will restart with the factory default configuration.
Phone 1/2 Connecters for analog phone(s).
GigaLAN (1-4) Connecters for local networked devices.
WAN1/WAN2(Giga) Connecters for remote networked devices.
USB Connecter for Mobile HDD, 3G Modem or printer.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
To Next Page
Loading...
Need help?
General
