Vigor2920 Series User’s Guide
281
Click any index number link to open the following page.
Available settings are explained as follows:
Item Description
Name
Type a name for such profile. The length of the use name is
limited to 19 characters.
Common Name
Identifier
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is “cn”.
Base Distinguished
Name / Group
Distinguished Name
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it’s
too long. Then you may click the
button to list all the
account information on the AD/LDAP Server to assist you
finish the setup.
Additional Filter
This is an optional setting.
After finished the above settings, click OK to save and exit this page. A new profile will be
created.
For detailed information about LDAP application, refer to section 4.14 How to Implement
the AD/LDAP Authentication for User Management?
4
4
.
.
1
1
0
0
.
.
6
6
U
U
P
P
n
n
P
P
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers,
the major feature of UPnP on the router is “NAT Traversal”. This enables applications inside
the firewall to automatically open the ports that they need to pass through a router. It is more
reliable than requiring a router to work out by itself which ports need to be opened. Further,
the user does not have to manually set up port mappings or a DMZ. UPnP is available on
Windows XP and the router provide the associated support for MSN Messenger to allow full
use of the voice, video and messaging features.
To Next Page
Loading...
Need help?
General
