Vigor2920 Series User’s Guide
196
Available settings are explained as follows:
Item Description
Check to enable the
Filter Rule
Check this box to enable the filter rule.
Comments
Enter filter set comments/description. Maximum length is 14-
character long.
Index(1-15)
Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always work.
Clear sessions when
schedule ON
Check this box to clear all the sessions when the schedule is
configured and specified above.
Direction
Set the direction of packet flow. It is for Data Filter only. For
the Call Filter, this setting is not available since Call Filter is
only applied to outgoing traffic.
To Next Page
Loading...
Need help?
General
