Vigor2920 Series User’s Guide
217
Item Description
address.
Select Any Address if this object contains any IP address.
Select Mac Address if this object contains Mac address.
MAC Address
Type the MAC address of the network card which will be
controlled.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
3. After finishing all the settings here, please click OK to save the configuration.