Vigor2920 Series User’s Guide
225
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination
Port
Source Port and the Destination Port column are available for
TCP/UDP protocol. It can be ignored for other protocols. The
filter rule will filter out any port number.
(=) – when the first and last value are the same, it indicates one
port; when the first and last values are different, it indicates a
range for the port and available for this profile.
(!=) – when the first and last value are the same,
it indicates
all the ports except the port defined here; when the first
and last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this
profile.
3. After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
