Vigor2920 Series User’s Guide
235
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name
Type a name for such SMS profile.
Service Provider
Use the drop down list to specify the service provider which
offers SMS service.
Username
Type a user name that the sender can use to register to
selected SMS provider.
Password
Type a password that the sender can use to register to
selected SMS provider.
Quota
Type the number (e.g., 5, 10, etc.) of the SMS text message
allowed to be sent out by this profile. When WAN interface
disconnects frequently, the text message will be sent for
several time (e.g., 5, 10, etc.) within the time interval. Once
the quota ran out, no SMS will be sent out.
Note: The number of the credit can be purchased from the
service provider chosen above. One credit equals to one
SMS text message on the standard route.
Sending Interval
To avoid quota being exhausted soon, type time interval for
sending the SMS.
3. After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
