Draytek Vigor2920 Series User Manual

Vigor2920 Series User’s Guide
271
Item Description
Set to Factory Default
Clear all profiles and recover to factory settings.
Enable Dynamic DNS
Setup
Check this box to enable DDNS function.
Auto-Update interval
Set the time for the router to perform auto update for
DDNS service.
View Log
Display DDNS log status.
Force Update
Force the router updates its information to DDNS server.
Index
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
WAN Interface
Display the WAN interface used.
Domain Name
Display the domain name that you set on the setting page
of DDNS setup.
Active
Display if this account is active or inactive.
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Available settings are explained as follows:
Item Description
Enable Dynamic DNS
Account
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN Interface
WAN1/WAN2/WAN3 First - While connecting, the
router will use WAN1/WAN2/WAN3 as the first channel
for such account. If WAN1/WAN2/WAN3 fails, the
router will use another WAN interface instead.
WAN1/WAN2/WAN3 Only - While connecting, the

Draytek Vigor2920 Series Specifications

General

Brand	Draytek
Model	Vigor2920 Series
Category	Network Router
Language	English