Vigor2920 Series User’s Guide
274
Index
Click the number below Index to access into the setting
page of schedule.
Profile
Display the name of the profile.
Domain Name
Display the domain name for certain service (e.g., FTP,
Mail or Web server) used by such profile.
To add a new LAN DNS profile,
1. Click any index, for example Index No.1.
Available settings are explained as follows:
Item Description
Enable
Check the box to enable such profile.
Profile
Type a name for such profile.
Domain Name
Type a domain name (e.g., FTP, Mail or Web server) for
such profile.
IP Address List
Add – Click it to open the following dialog. You have to
give an IP address representing the host.
Only responds….. - Disable it to apply this profile to
all of the LAN subnets. Or enable it to apply such
profile to the PCs on the same subnet.
Delete – Click it to remove the existed IP address displayed
on the IP Address List.