Vigor2920 Series User’s Guide
291
Available settings are explained as follows:
Item Description
IKE Authentication
Method
This usually applies to those are remote dial-in user or node
(LAN-to-LAN) which uses dynamic IP address and
IPSec-related VPN connections such as L2TP over IPSec and
IPSec tunnel.
Pre-Shared Key -Currently only support Pre-Shared Key
authentication.
Pre-Shared Key- Specify a key for IKE authentication
Confirm Pre-Shared Key- Retype the characters to confirm
the pre-shared key.
IPSec Security Method
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High (ESP) - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You may
select encryption algorithm from Data Encryption Standard
(DES), Triple DES (3DES), and AES.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
