EasyManuals Logo
Home>Draytek>Network Router>Vigor2920 Series

Draytek Vigor2920 Series User Manual

Draytek Vigor2920 Series
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #305 background imageLoading...
Page #305 background image
Vigor2920 Series User’s Guide
295
Available settings are explained as follows:
Item Description
User account and
Authentication
Enable this account - Check the box to enable this function.
Idle Timeout- If the dial-in user is idle over the limitation of
the timer, the router will drop this connection. By default, the
Idle Timeout is set to 300 seconds.
Allowed Dial-In Type
PPTP - Allow the remote dial-in user to make a PPTP VPN
connection through the Internet. You should set the User Name
and Password of remote dial-in user below.
IPSec Tunnel - Allow the remote dial-in user to make an
IPSec VPN connection through Internet.
L2TP with IPSec Policy - Allow the remote dial-in user to
make a L2TP VPN connection through the Internet. You can
select to use L2TP alone or with IPSec. Select from below:
None - Do not apply the IPSec policy. Accordingly, the
VPN connection employed the L2TP without IPSec
policy can be viewed as one pure L2TP connection.
Nice to Have - Apply the IPSec policy first, if it is
applicable during negotiation. Otherwise, the dial-in VPN
connection becomes one pure L2TP connection.
Must -Specify the IPSec policy to be definitely applied
on the L2TP connection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor2920 Series and is the answer not in the manual?

Draytek Vigor2920 Series Specifications

General IconGeneral
BrandDraytek
ModelVigor2920 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals