Vigor2920 Series User’s Guide
320
Calling via SIP Servers
First, the Vigor V models of yours will have to register to a SIP Registrar by sending
registration messages to validate. Then, both parties’ SIP proxies will forward the
sequence of messages to caller to establish the session.
If you both register to the same SIP Registrar, then it will be illustrated as below:
The major benefit of this mode is that you don’t have to memorize your friend’s IP
address, which might change very frequently if it’s dynamic. Instead of that, you will
only have to using dial plan or directly dial your friend’s account name if you are with
the same SIP Registrar.
Peer-to-Peer
Before calling, you have to know your friend’s IP Address. The Vigor VoIP Routers will
build connection between each other.
Our Vigor V models firstly apply efficient codecs designed to make the best use of
available bandwidth, but Vigor V models also equip with automatic QoS assurance.
QoS Assurance assists to assign high priority to voice traffic via Internet. You will
always have the required inbound and outbound bandwidth that is prioritized exclusively
for Voice traffic over Internet but you just get your data a little slower and it is tolerable
for data traffic.
To Next Page
Loading...
Need help?
General
