Draytek Vigor2920 Series User Manual

Vigor2920 Series User’s Guide
350
of a station with network card installed, press Start PBC button of network card.
 If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the vigor router.
For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in
Wireless LAN>>Security, you will see the following message box.
Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK
mode and access WPS again.
Below shows Wireless LAN>>WPS web page.

Draytek Vigor2920 Series Specifications

General

Brand	Draytek
Model	Vigor2920 Series
Category	Network Router
Language	English