Vigor2920 Series User’s Guide
359
Available settings are explained as follows:
Item Description
Scan
It is used to discover all the connected AP. The results will be
shown on the box above this button.
Statistics
It displays the statistics for the channels used by APs.
Add to
If you want the found AP applying the WDS settings, please
type in the AP’s MAC address on the bottom of the page and
click Bridge or Repeater. Next, click Add to. Later, the MAC
address of the AP will be added to Bridge or Repeater field of
WDS settings page.
To Next Page
Loading...
Need help?
General
