Vigor2920 Series User’s Guide
46
Item Description
User Name
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Password
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Remote Network IP
Please type one LAN IP address (according to the real location
of the remote host) for building VPN connection.
Remote Network
Mask
Please type the network mask (according to the real location of
the remote host) for building VPN connection.
3. After finishing the configuration, please click Next. The confirmation page will be
shown as follows. If there is no problem, you can click one of the radio buttons listed on
the page and click Finish to execute the next action.
Available settings are explained as follows:
Item Description
Go to the VPN
Connection
Management
Click this radio button to access VPN and Remote
Access>>Connection Management for viewing VPN
Connection status.
Do another VPN
Server Wizard
Setup
Click this radio button to set another profile of VPN Server
through VPN Server Wizard.
View more detailed
configuration
Click this radio button to access VPN and Remote
Access>>LAN to LAN for viewing detailed configuration.
To Next Page
Loading...
Need help?
General
