Vigor3900 Series User’s Guide
96
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
End IP
Set the ending IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
DNS
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor3900 as the DNS server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
– click the icon to remove the selected entry.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The LAN profile has been edited.
To Next Page
Loading...
Need help?
General
