Vigor3900 Series User’s Guide
281
router, and the later box indicates a subnet mask allowed to
login to the router.
Allow Ping from WAN
Click Enable to allow system administrator to ping the router
from WAN interface.
Allow Ping form LAN
Click Enable to allow system administrator to ping the router
from LAN interface.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
1
1
2
2
.
.
7
7
S
S
N
N
M
M
P
P
S
S
e
e
t
t
u
u
p
p
This page allows you to manage the settings for SNMP setup.
Available parameters are listed as follows:
Item Description
Enable This Profile
Check the box to enable such profile.
Get Community
Set the name for getting community by typing a proper
character. The default setting is public.
Set Community
Set community by typing a proper name. The default setting
is private.
Manager Host IP
Type the IP address for the manager host.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
To Next Page
Loading...
