Vigor3900 Series User’s Guide
280
4
4
.
.
1
1
2
2
.
.
6
6
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
This page allows you to open or close the web configurator ofVigor3900 by using Telnet,
SSH, HTTP, HTTPS… and etc…
Available parameters are listed as follows:
Item Description
Web Allow
Click Enable to allow system administrator to login from the
Internet and management the web page of the router.
Web Port
Type the port number for the management through web
page.
Telnet Allow
Click Enable to allow system administrator to login from the
telnet and management the web page of the router.
Telnet Port
Type the port number for the management through telnet
page.
SSH Allow
Click Enable to allow system administrator to login from the
SSH server and management the web page of the router.
SSH Port
Type the port number for the management through SSH
server.
HTTPS Allow
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
HTTPS Port
Type the port number for the management through HTTPS
server.
User Define
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
Allowed IP1 - Allowed
IP3
Type the first IP address for the system administrator to
login.
The former box indicates an IP address allowed to login to the