Vigor3900 Series User’s Guide
111
4
4
.
.
2
2
.
.
5
5
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Each item will be explained as follows:
Item Description
Mode
Enable - Choose it to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Disable - Choose it to disable this function. All the settings
on this page will be invalid.
Strict Bind – Choose it to lock the connection of the
IP/MAC which is not listed in IP Bind List.
Select All
Allow you to choose all the items listed in ARP Table.
Move
Move the selected item to IP Bind List.
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Move on IP
Bind List
.
IP Address - Display the IP address of one device.
MAC Address - Display the MAC address of the device.
Add
It allows you to add one pair of IP/MAC address and display
on the table of IP Bind List.
Edit
It allows you to edit and modify the selected IP address and
MAC address that you create before.
To Next Page
Loading...
Need help?
General
