Vigor3900 Series User’s Guide
226
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable This Profile
Check this box to enable this profile.
Type
There are three types offered here for you to choose. Please
choose PPTP Dial-Out for this case.
PPTP
Always On - Click Enable to make the profile being always
on.
Server IP/Host Name - Type the IP address or the host
name of PPTP server.
PPTP User Name - Type a user name for authentication in
PPTP connection.
PPTP Password - Type a password for authentication in
PPTP connection.
Local IP/Subnet Mask - Type the IP address and subnet
mask of local host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
Route / NAT Mode - Specify the purpose for such profile.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
To Next Page
Loading...
Need help?
General
