Vigor3900 Series User’s Guide
232
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable This Profile
Check this box to enable such profile.
Protocol
Choose the protocol for such profile.
Source IP Address
Type the source IP address specified for this profile.
Source Mask
Type the subnet mask address specified for the source IP.
Destination IP
Address
Type the destination IP address specified for this entry.
Destination Mask
Type the subnet mask address specified for the destination
IP.
Destination Port
Start
Type the start point.
Destination Port
End
Type the end point.