4
Factory Reset Press it for more than 15 seconds. When the ACT LED
flashes rapidly, release the button.
Mesh Node
Mode
This AP is configured with Mesh Node mode.
Press it for more than 2 seconds. Within 5 seconds, the
AP is trying to connect to the mesh network.
Range Extender
Mode
This AP is configured as Range Extender mode.
Press it for more than 2 seconds. Within 5 seconds, the
AP is trying to connect to the AP.
Button
AP Mode This AP is configured as AP mode and the WPS function
is enabled.
Press it for more than 2 seconds. VigorAP will wait for
any wireless client connecting to this AP through WPS.
Interface Description
LAN Connecter for Ethernet device.
You can connect 10/100M Ethernet network devices, such as a PC, TV,
camera and anything else you want to put on your networks.
Note:
For the sake of security, make the accessory kit away from children.
To Next Page
Loading...
Need help?
General
