Draytek VigorAP 802 User Manual

8
I-4 Accessing to Web User Interface
All functions and settings of this access point must be configured via web user interface. Please start
your web browser (e.g., Firefox).
1. Make sure your PC connects to the VigorAP 802 correctly.
2. Open a web browser on your PC and type http://192.168.1.2. A pop-up window will open to
ask for username and password. Pease type “admin/admin” on Username/Password and click
OK.

Note:
You may either simply set up your computer to get IP dynamically from the router or set up the IP
address of the computer to be in the same subnet as the IP address of VigorAP 802.
 If there is no DHCP server on the network, then VigorAP 802 will have an IP address of
192.168.1.2.
 If there is DHCP available on the network, then VigorAP 802 will receive it’s IP address via the
DHCP server.
 If you connect to VigorAP by wireless LAN, you could try to access the web user interface
through http://vigorap.com.

Draytek VigorAP 802 Specifications

General

Brand	Draytek
Model	VigorAP 802
Category	Wireless Access Point
Language	English