94
Comment Type a brief description for the specified client’s MAC address.
Add Add a new MAC address into the White List/Black List.
Delete Delete the selected MAC address in the White List/Black List.
Edit Edit the selected MAC address in the White List/Black List.
Cancel Give up the configuration.
Click OK to save these settings.
III-2-4 Status of Settings
Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 802s)
registered to Vigor 2862 or Vigor2926 series. This web page displays the settings related to Load
Balance for VigorAP 802. In which, By Station Number, By Traffic and Force Overload Disassociation
indicate settings configured in Vigor 2862 or Vigor2926 series.
“X” means the function is not enabled or VigorAP 802 has not registered to any Vigor router yet.
Below shows a setting example for Load Balance settings configured in Vigor 2862 or Vigor2926
series.
To Next Page
Loading...
Need help?
General
