Draytek VigorAP 802 User Manual

33
II-3-2 Security
This page allows you to set security with different modes for SSID 1, 2, 3 and 4 respectively. After
configuring the correct settings, please click OK to save and invoke it.
By clicking the Security Settings, a new web page will appear so that you could configure the
settings.
Available settings are explained as follows:
Item Description
Mode There are several modes provided for you to choose.
Disable - The encryption mechanism is turned off.
WEP - Accepts only WEP clients and the encryption key should be
entered in WEP Key.
WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK - Accepts only
WPA clients and the encryption key should be entered in PSK. The
WPA encrypts each frame transmitted from the radio using the key,
which either PSK (Pre-Shared Key) entered manually in this field below
or automatically negotiated via 802.1x authentication.
WEP/802.1x - The built-in RADIUS client feature enables VigorAP 802
to assist the remote dial-in user or a wireless station and the RADIUS
server in performing mutual authentication. It enables centralized

Draytek VigorAP 802 Specifications

General

Brand	Draytek
Model	VigorAP 802
Category	Wireless Access Point
Language	English