32
by default, it means disabling the VLAN function for the SSID.
PHY Mode Data will be transmitted via HTMIX mode.
Each access point should be setup to the same Phy Mode for
connecting with each other.
Security Select WEP, TKIP or AES as the encryption algorithm.
Type 8~63 ASCII characters, such as 012345678..(or 64 Hexadecimal
digits leading by 0x, such as "0x321253abcde...").
Peer MAC Address Type the peer MAC address for the access point that VigorAP 902
connects to.
After finishing this web page configuration, please click OK to save the settings.
To Next Page
Loading...
Need help?
General
